The sharpening steel has a very deceptive name. It’s purpose is to maintain a blades sharp edge by honing it. An edge that may have been bent from use will stay sharp longer with proper use of a sharpening steel. In professional kitchens sharpening steels are used every day to main the blades of all their knives. The saying “little and often” are usually applied. However the average consumer only need use it once a week depending on how much cooking you do. Here are instructions on how to use a sharpening steel.
- Hold the steel in your non-dominant hand. The knife is what you will be moving during this process, so you want to hold it in your dominant hand.
- You will find for safety that some will tell you to hold the steel straight up and down. You can either place the point of the steel on a counter top – and a non-slip surface. Most professionals use the method described in the video.
- Hold the knife at a 20° angle. A 15° to 20° angle is the ideal angle for honing a knife blade.
- Start at the heel of the knife and draw the knife towards your body, this allows more control.
- Lightly press the blade against the steel, apply a little pressure but not too hard. Pressing too hard will dull the knife and damage the steel.
- Draw the knife across the steel in a downward motion. The knife will make a swooping motion as you draw it from heel to tip across the sharpening steel. Be sure to start at the top of the steel and move to the bottom.
- Make a dozen passes on each side. That is all it should take to realign the knife blade, but remember to alternate sides with each stroke to achieve a straight edge.
- Rinse and dry the knife. Rinse the knife in a sink and dry it with a towel to remove any shavings from the blade.
The more you practice using the steel the better and faster you will be able do it. However, the angle and pressure applied to the blade is more important than speed, so make sure you are using the steel correctly before attempting to speed up the process. Watch this short video for a great demonstration!





Speak Your Mind